What is Yag Laser Tattoo Removal Machine?

Yag Laser Tattoo Removal Principle

Yag laser tattoo removal machine using the high energy emitted by the laser instantaneously. The irradiated pigment particles absorb the energy and rupture instantly, part of which turns into even smaller fragments and excrete out of the body. Part of which is engulfed by human macrophages and excreted through the lymphatic system, thus getting rid of the pigment. Since normal tissues absorb less laser light of specific wavelengths output by the nd yag laser instrument. No normal tissues will harme, thus preserving the integrity of the cellular framework and never forming scarring conditions. Which is a treatment safety unmatched anywhere else at present, so to the maximum extent to ensure that customers will not be troubled by post-treatment complications.

Yag Laser Tattoo Removal Advantages

1. With high homogeneous light spot, uniform energy distribution, good consistency of
   treatment effect and more safety.
2. More effective against all exogenous and endogenous pigments
3. Short pulse width, with a special laser bar for industry, higher peak power to break down
   pigment more thoroughly.
4. Reduced pain and less skin damage.
5. Intelligent water temperature control system: to avoid high water temperature and
   damage to the handle.
6. Unique shape design and color matching, making the product more beautiful and
   fashionable.

Q-switch Laser Application

• Clears stubborn blemishes
• Scar Removal, Acne Mark Removal
• Tattoo Removal, Skin Rejuvenation
• Improves skin texture, brightens and rejuvenates skin

Yag Laser Tattoo Removal Machine Technical Parameters

• Laser type: ND:YAG solid-state laser
• Laser wavelength: 1064nm, 532nm, 1320nm
• Operating frequency: 1–10Hz Adjustable
• Pulse width: 6ns
• Screen size: 7-inch true color touch screen
• Case material: ABS plastic + metal
• Input power: 500W Operating
• Language: English(welcome to customize other languages)
• Power supply voltage: AC220V; AC110V

Introduction of Nd Yag laser Probe

1064 laser head

1-10 spots adjustable, effective in removing dark tattoos, eyebrow tattoos, lip tattoos, eyeliner and traumatic pigmentation and freckles, etc.

532 laser head

1-10 spots adjustable, suitable for treating red or tan tattoo, eyebrow tattoo, lip liner, eyeliner. And can effectively lighten red or tan birthmarks and all kinds of light spots, etc. Adjustable focus.

1320 laser head

black face doll head (skin rejuvenation and whitening, pore reduction)

Q Switched Nd Yag Laser Packing List

• Host: 1 set
• Handle: 1 piece
• Handle probe：532nm, 1064nm and 1320nm
• Handle hanger: 1 piece
• Hanging screw: 2 pieces
• The opening key: 2 pieces
• Safety glasses: 1 pair
• Goggle: 1pair
• Water injection funnel: 1 piece
• Foot switch: 1 piece
• Carbon: 1 piece
• Power Line: 1 piece
• Manual: 1 piece

Requirements for the Operator

The operator of the laser tattoo removal machine should understand the expertise of the laser and be used by trained and qualified professionals.

Operational Safety

• You must fill up the water before starting the machine, otherwise it will burn the treatment hand! And use pure water or medical distilled water.
• Check the circuit and water circuit of the instrument immediately after turning it on, and observe the safety of the circuit and waterway from time to time throughout the operation.
• Never look directly at the glare from the front exit of the bald hand.
• Prohibite reflective substances such as watches, mirrors, jewelry, etc. in the treatment room.
• Keep the light guide system clean at all times and ensure that the cold gel does not contaminate the light guide system.

Clinical Applications

1. Cleanse the skin with a cleanser and remove the patient’s jewelry. For example:
   necklaces, earrings, and other reflective objects.
2. The cleanser is performed in a supine position with both physician and patient wearing
   protective eyewear, disinfecting the patient’s facial skin, adjusting the energy to clean the
   skin according to its skin type, skin sensitivity, lesion area and color shade, and removing the patient’s jewelry. Such as: necklaces, earrings, and other reflective objects
3. During the tattoo removal treatment, the physician holds the output of the laser machine, irradiates the skin surface vertically, first with the skin in front of the ear line test sweep 2-3 times, observe the local response for 3-5 min, gradually increase the energy density from low to high, to the extent that the skin is mildly red.
4. Then sweep the entire area longitudinally and horizontally back and forth at an even rate, with enhanced sweeping in the lesioned areas, 2-3 times in total. 5. Generally, the darker the skin tone, the lower the energy density, and the lighter the skin tone, the higher the energy density.

Effect of Yag Laser Tattoo Removal

Laser Treatment Interval

The two treatments should be spaced about 1-2 months apart to allow sufficient time for the broken pigment particles to be absorbed.

Number of Yag Laser Tattoo Removal Treatments

The number of q switched laser treatments for a specific patient is determined by the concentration and 4 depth of the pigment, the composition of the pigment, the dose of laser used for each treatment, and the absorption of pigment particles by macrophages in the patient’s body. Generally, exogenous pigmentation requires more than 3 treatments, and endogenous pigmentation requires more than 5 treatments to obtain more satisfactory results, and a few patients still have unsatisfactory results after several treatments.

Handling Safety

• The yag laser tattoo removal instrument has a precision memory device, and the user should try not to move it at a long distance.
• Before transporting the machine, the water in the instrument must be cleaned, and the water inlet, overflow and drain sealing caps should be tightened;
• Remove the handle, seal the two nozzles of the main plug and insert, avoid the residual water stain inside the instrument, and wet the instrument;
• The shock absorb package provided by the original factory must be used during transportation, otherwise the optical system may be out of adjustment and affect the energy output.