EndoSculpt Machine Body Shaping

EndoSculpt machine is a device that can be sanitized fully after every treatment thus guaranteeing hygiene, safety for both operator and client. The EndoSculpt inner ball roller handpiece and its cylinder can extracte and sanitized making it an effective, totally safe treatment which gives quick results. EndoSculpt therapy is a treatment that allows the reactivation of blood circulation, it can improves skin trophism and cellular oxygenation. Inner ball roller therapy is the innovating mix between beauty and health, it is the one method able to care such complex pathologies as septal secundary lymohoedema and celulite. This method permits to obtain such encouraging results that can be considered, it is much more satisfying than a medical therapy.

Our non-surgical EndoSculpt Therapy technique combats the appearance of cellulite, even in areas of the body where fatty deposits can build up and traditionally be tricky to remove. This build-up can occur on the arms, back, waist, abdomen, thighs and buttocks. Our treatments can improve fatty deposits on these areas, leaving your body smooth and toned.

Cellulite affects 9 out of every 10 people – men and women. Cellulite occurs because of hypertrophy fat cells and water retention. This is brought about by the presence of poor circulation. 5D Roller Therapy reduces cellulite by improving local blood circulation and smoothing the tissues of the problem areas.

Inefficient blood and lymphatic circulation can lead to discomfort. EndoSculpt Therapy reactivates local blood circulation and activates the lymphatic system.

Our EndoSculpt method works gently on the tissue to tone and firm yielding remarkable results and a more youthful complexion.

Legs Arms Buttocks Back Abdomen Feet

  1. The accessories worn on the body should be removed, naked (or wear thongs, or wear disposable underwear).
  2. Unload the roller sphere built in the handle, wipe and clean the sphere (do not immerse it in liquid). Wipe it dry before putting it in the massage roller to ensure that the sphere is free of any moisture.
  3. Clean the skin.
  4. Before the operation, apply massage cream or essential oil products to the implementation site so that can enhance the operation effect.
  5. Set the direction of the speed (the direction of rotation is opposite to the direction of application) and adjust the intensity of the speed;
  6. Use the roller handle to treat the entire area, hold both ends of the handle with both hands and slowly and gently push and pull. As the sphere automatically rolls, it slowly pushes and fits the skin.
  7. After the operation, wipe off the residual massage cream or essential oil on the cleaning site;
  8. Such as applying a mask on the face.
  9. After each use, it is recommended to wipe and clean the sphere with saline or alcohol, wipe it dry to keep it dry, and do not immerse it in liquid.
  10. Please do not touch the silicone probe with sharp tools to avoid cutting the probe.
  11. Note: During the working process of the handle, do not put your fingers into the groove of the handle to avoid pinching your hands.
EndoSculpt Machine
Ендосфера handle

Gold Metal Body Roller Handpiece (Standard)

Black POM Body Roller Handpiece (Standard)

White POM Body Roller (Optional)

Blue Silicone Body Roller (Optional)

Transparent Silicone Body Roller (Optional)

Transparent Silicone Roller Face Handpiece (Optional)

Ендосфера handle
Ендосфера roller

Q: Is EndoSculpt therapy safe?

A: Endoroller therapy is a non-invasive treatment, it is 100% safe and does not have any side effects.

Q: Does EndoSculpt therapy hurt?

A: No, it is actually a very pleasant treatment. Most customers say it feels similar to deep tissue massage. The intensity/stress level gradually increases with each treatment and can adjust to your desired tolerance. There are no side effects, and you can return to normal life immediately after treatment.

Q: How long is a single treatment?

A: It is suitable for any part of the body or face, that depending on the size of the treatment area. The single time varies from about 45 minutes to 1 hour and 30 minutes.

Q: How often can the treatment be performed? How many times in a course of treatment?

A: It is usually recommend to do it 2 or 3 times a week. The minimum time required between treatments is 48 hours. A course of treatment is 12-18 times.

Q: How long will it take to see the results?

Usually you can see the initial results after 6 to 12 treatments. According to your physical condition and related lifestyle factors, determine the appropriate number of treatments you need. Recommend to perform 12-18 treatments to get the best results. In the case of excessive sagging or over weight, 24 treatments is better.

How to care after EndoSculpt treatment?

Use mild products and moisturizing essences and moisturizers.

Please contact us to get the price of EndoSculpt Machine!

Please enable JavaScript in your browser to complete this form.
Share