What is Skin Cooling Machine?

Theory of Skin Cooling Machine

Professional skin cooling machine designed for a variety of laser treatment. The skin cooling system is specially for alleviating pain and thermal damage during laser procedures. It also can relieve pain during temporary local anesthesia during injection. Skin air cooling system converts air to -20°C air and delivers it to the treatment area via a flexible air duct. Which significantly reduces the pain and discomfort of the epidermis during laser and glare treatment. While protecting the tissue from thermal damage, allow to use higher energy to improve the treatment. Unlike traditional contact cooling, jet cooling or ice cooling methods, the skin cooling device provides efficient cooling of the skin without any impact on the laser beam.

Excellent Clinical Performance

• Increase patient comfort
• Reduce erythema symptoms
• Reduce the risk of burns
• Use greater therapeutic energy to improve efficacy
• Treating dark skin is safer and more reliable

Which beauty machine can work with the skin cooling system

• Q Switched Laser tattoo removal machine
• IPL/OPT/Diode Laser/Laser hair removal machine
• CO2 Laser
• Micro Needle Device
• Physiotherapy Relief Recovery Equipment
• Diamond Microdermabrasion

Skin Cooling Machine Composition

The skin cooling machine consists of a cold air manufacturing unit, an operation touch screen, a cold air discharge hose, an upper storage table, and a moving wheel. Skin cooling device main body compose of a base, an inner frame and a casing that wraps the frame. The chassis is made of a spray-coated material that forms a table top on which the item can be placed. Rear part of the main unit has a fuse for connecting the power supply, a power switch, an air cleaner and a control screen for machine operation on the upper front part. A hose for discharging cold air and floor drain barrel for discharging condensed water at the lower part. Attached to the lower part of the main unit for moving wheels.

Skin Cooling Machine Working Probe

Characteristics amd Summary

The key technology of the skin cooling machine is to remove clean moisture and dust by heat exchangers that liquefy the surrounding air, to produce clean low-temperature air and to discharge low-temperature air out of the hose. Use low-temperature air to achieve the purpose of relieving pain in the affected area and reducing the edema. Through the operation of skin air cooling software, the running state of the machine will reflect on the interactive interface. It marks with a graphic text light and a digital indicator light so that the operation state of skin cooling machine can easily graspe and operate.

Preparation before Use

• ① Users should read the manual before use skin cooling machine, familiar with the usage and precautions
• ② Connecte the power cord to a socket that can be grounded
• ③ Use in a smooth and flat place
• ④ The suction filter is not blocked by dust or the like

Precautions when Using

• (1) Children can not use the machine (Incorrect operation can cause adverse effects on skin and joints).
• (2) Use the machine in a flat and sturdy place on the ground.
• (3) When transporting the product, pay attention to the inclination not to exceed 30 degrees (In case of a slope of more than 30 degrees, you should place it for less than 4 hours).
• (4) Need to avoid contact with rain and snow when use the machine outdoor.
• (5) Should always keep the equipment clean.
• (6) Rear suction air filter is open operation, the machine tilt can not exceed 15 degrees.
• (7) Do not drag the air-conditioning hose to move or pull the machine (the hose will be damaged)
• (8) Before using on the human body, hold the cold air discharge hose and vent it to the open space for 2-3 seconds.
• (9) In order to work properly, please defrost regularly(Defrost can make the machine’s air-conditioning exhaust more efficient and keep the machine working properly).
• (10) When the electrical accessories are placed or warranted, the power must be unplugged first.
• (11) When you do not use the machine for a long time, turn the power switch on the back of the product to OFF and unplug the power.
• (12) Do not arbitrarily change the machine.
• (13) When cleaning the machine body, clean it with a clean dry cloth. Use a non-corrosive liquid cleaner to clean it on the rag.
• (14) Side effects warning: When used in concentrated places for a long time, it may cause frostbite and need attention.

How to Maintain the Skin Air Cooling Machine

• (1) After use the skin cooling machine, operate according to the specified sequence, press the button, switch, etc. to return to the pre-use state. Press the main power blocker switch to the OFF position.
• (2) Store at room temperature to avoid high temperature and humidity.
• (3) When not in use for a long time, the power supply is removed from the interface and stored separately.
• (4) Avoid direct light and chemical storage.

Technical of Skin Cooling Machine

• Operating screen: User-operated unit for surgical purposes
• Air conditioning unit: Air cooled unit
• Storage table: Machine movement, handles and countertops used for direction change
• Hose: Cooling air communication unit
• Leaking bucket and drain: For collecting condensate
• Equipment moving wheel: To remove the machine
• Air suction filter: Filter out foreign matter in the air so that clean air flows into the machine
• Power line socket: Allows the machine to be powered by a cable connection interface
• Fuse: Overvoltage, over current blocking unit
• Power switch: Press the button to connect the machine to the power supply
• Vent: Allows the device to dissipate heat

Specification of Skin Cooling Machine

• Compressor power: 495W
• Maximum heat dissipation: 1800W
• Maximum cooling capacity: 1600W
• Maximum air flow: 1250L/min
• Air volume level: level 1-7
• Output temperature: -20℃
• Total power: 1000W
• Frequency: 50Hz
• Current: 6A
• Voltage: 220VAC, 50Hz
• Package size: 102cmX86cmX46cm
• Weight: 64kg

Welcome to contact us if you need a Skin Cooling Machine for you Clinic!